三元层状MAX相固溶体研究进展

MAX相是一类具有层状结构的三元碳化物或(和)氮化物,M是过渡金属元素,A主要是ⅢA~ⅤA族元素,X是C或N元素。这类化合物兼具陶瓷材料和金属材料的特点,具有优异的导电、导热、耐腐蚀以及抗氧化等性能,在诸多领域具有潜在应用价值。近年来,新元素、新结构和固溶体MAX相的不断出现,进一步扩展了MAX相家族。固溶体MAX相是将合适的元素固溶到已知MAX相中而得到的新MAX相。本文分四类总结了127种MAX相固溶体,对其结构改变和性能调控进行了概括,并指出目前研究存在的理论问题和亟须解决的关键技术,最后对MAX相固溶体的发展进行了预测和展望。     

变刚度层叠梁的力学性能研究

为满足不同场景下的功能需求，变刚度结构得到越来越广泛的应用．以机器人手臂为例，在执行操作时，需要其手臂的结构刚度足够大，避免出现过大的扭曲和变形，而在与人交互时，又需要其结构足够柔软，以保证在此过程中与人交互的安全性．该类变刚度结构可根据需求通过外部激励在柔性和刚性状态之间自由切换．在该文章中，研究分析了层叠梁结构，通过理论推导和数值模拟，对其力学性能做出了很好的预测，同时为此类结构的研究提供了有效可靠的思路和方法．     

基于不确定控制理论的最优策略研究

本文在不确定理论的框架下,研究一类带背景状态变量的最优控制模型.在乐观值准则下,利用不确定动态规划的方法,证明了不确定最优性原则,得到最优性方程.作为应用,求解一个固定缴费(DC)型养老金的最优投资策略问题,在乐观值准则下,以工资变量为背景状态变量,建立养老金模型.通过求解不确定最优性方程得到最优投资策略和最优支付率.     

Method validation,residue analysis and dietary risk assessment of trifloxystrobin and trifloxystrobin acid in milk,eggs and pork

Trifloxystrobin (TFS) is a widely used strobilurin fungicide and its residues accumulating in animal-derived food could result in potential harm to consumers. By optimization of extraction solvents and cleanup sorbents, a residue analysis method for TFS and its metabolite trifloxystrobin acid (TFSA) was established in milk, eggs and pork based on QuEChERS sample preparation and LC–MS/MS. The calibration curves exhibited good linearity with determination coefficients (R²) >0.9930 over the range of 0.5–250 ng/ml for both TFS and TFSA. The recoveries of the two analytes were 81–100% with RSD 3–10% and 76–96% with RSD 2–13%, respectively. The limit of quantification (LOQ) was 1 ng/g for both analytes. The milk, egg and pork samples, 30 each, were collected from the 30 main producing regions in China, and residues of TFS and TFSA were analyzed. The concentrations of both analytes were lower than the corresponding LOQs and maximum residue limits. Long-term dietary risk assessment showed that the hazard quotients were 0.001–0.003%, indicating an absence of unacceptable risks in milk, eggs and pork to the health of common consumers in China.     

Computational Insights into the Allosteric Effect and Dynamic Structural Features of the SARS-COV-2 Spike Protein

COVID-19 caused by SARS-COV-2 is continuing to surge globally. The spike (S) protein is the key protein of SARS-COV-2 that recognizes and binds to the host target ACE2. In this study, molecular dynamics simulation was used to elucidate the allosteric effect of the S protein. Binding of ACE2 caused a centripetal movement of the receptor-binding domain of the S protein. The dihedral changes in Phe329 and Phe515 played a key role in this process. Two potential cleavage sites S1/S2 and S2′ were exposed on the surface after the binding of ACE2. The binding affinity of SARS-COV-2 S protein and ACE2 was higher than that of SARS-COV. This was mainly due to the mutation of Asp480 in SARS-COV to Ser494 in SARS-COV-2, which greatly weakened the electrostatic repulsion. The result provides a theoretical basis for the SARS-COV-2 infection and aids the development of biosensors and detection reagents.     

Rational design of thermoelastic damping in microresonators with phase-lagging heat conduction law

The design of thermoelastic damping (TED) affected by the phase-lagging non-Fourier heat conduction effects becomes significant but challenging for enlarging the quality factor of widely-used microresonators operating in extreme situations, including ultra-high excitation frequency and ultra-low working temperature. However, there does not exist a rational method for designing the TED in the framework of non-Fourier heat conduction law. This work, therefore, proposes a design framework to achieve low thermoelastic dissipation of microresonators governed by the phase-lagging heat conduction law. The equation of motion and the heat conduction equation for phase-lagging TED microresonators are derived first, and then the non-Fourier TED design problem is proposed. A topology optimization-based rational design method is used to resolve the design problem. What is more, a two-dimensional (2D) plain-strain-based finite element method (FEM) is developed as a solver for the topology optimization process. Based on the suggested rational design technique, numerical instances with various phase lags are investigated. The results show that the proposed design method can remarkably reduce the dissipation of microresonators by tailoring their substructures.     

CoO纳米颗粒/石墨烯纳米纤维复合材料的制备及电化学性能

用石墨烯和Co(CH₃COO)₂·4H₂O作为原料,利用超声辅助法合成了锂离子电池的负极材料CoO纳米颗粒/中空石墨烯纳米纤维复合物.采用X射线衍射(XRD)确定材料的物相组成,采用扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察材料的表面形貌和微观结构,采用X射线光电子能谱(XPS)确定材料的价态结构.采用循环伏安、恒电流充放电和交流阻抗谱表征材料的电化学性能.结果显示,在100 mA/g的电流密度下,循环了160次后,可逆容量仍超过800 mA/g,库仑效率保持在99%以上.该材料优异的电化学性能主要归因于石墨烯的中空纤维结构,中空内部可以容纳电解液,能直接将离子输送到颗粒表面,实现了离子的快速传输;二维中空纤维搭建成三维网络结构,实现了三维电子传导网络.     

Reversible Switching CuII/CuI Single Sites Catalyze High-rate and Selective CO2 Photoreduction

Herein, we first design a model of reversible redox-switching metal–organic framework single-unit-cell sheets, where the abundant metal single sites benefit for highly selective CO₂ reduction, while the reversible redox-switching metal sites can effectively activate CO₂ molecules. Taking the synthetic Cu-MOF single-unit-cell sheets as an example, synchrotron-radiation quasi in situ X-ray photoelectron spectra unravel the reversible switching Cu^II/Cu^I single sites initially accept photoexcited electrons and then donate them to CO₂ molecules, which favors the rate-liming activation into CO₂^δ−, verified by in situ FTIR spectra and Gibbs free energy calculations. As an outcome, Cu-MOF single-unit-cell sheets achieve near 100 % selectivity for CO₂ photoreduction to CO with a high rate of 860 μmol g⁻¹ h⁻¹ without any sacrifice reagent or photosensitizer, where both the activity and selectivity outperform previously reported photocatalysts evaluated under similar conditions.     

GdPO4∶Sm3+荧光粉的焙烧温度和掺杂浓度的优化及发光和磁性能

以GdPO₄为基质,Sm³⁺为激活剂,采用水热法合成了纳米荧光粉前驱体,分别在800、900、1 000、1 100和1 200℃下焙烧,得到一系列GdPO₄∶Sm³⁺荧光粉。首先探究了GdPO₄∶Sm³⁺的最佳焙烧温度;其次研究了Sm³⁺掺杂浓度对GdPO₄∶Sm³⁺荧光性能的影响;最后研究了GdPO₄∶2% Sm³⁺的高温荧光性能和磁性能。使用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、磁强计和荧光分光光度计(FL)对荧光粉的晶体结构、形貌、发光和磁性能进行了表征。结果表明：荧光粉的晶体结构由前驱体六方晶系GdPO₄·H₂O∶Sm³⁺变为单斜晶系的GdPO₄∶Sm³⁺,形貌由纳米棒变为无规则块体。当焙烧温度为1 000℃,Sm³⁺掺杂浓度为2%时,荧光粉的发光强度和荧光寿命达到最大值。GdPO₄∶2% Sm³⁺中Sm³⁺之间能量传递类型为电偶极-电偶极相互作用,能量传递的临界距离为1.646~1.884 nm。最佳样品GdPO₄∶2% Sm³⁺有优异的热稳定性,热猝灭活化能为-0.157 eV,且具有良好的顺磁性,质量磁化率值为1.22×10^-4 emu·g^-1·Oe^-1。     

氮掺杂石墨烯负载单原子Zr催化CO2加氢的密度泛函理论研究

基于密度泛函理论计算,研究了H2和CO2在氮掺杂石墨烯负载单原子Zr催化剂(Zr Nx-Gr)上的吸附和CO2催化加氢反应. H2和CO2在Zr N3-Gr上单独吸附的吸附能分别为-0.49和-2.17 e V,在H2和CO2共吸附状态下,吸附能为-2.24 e V,均高于在Zr N4-Gr表面的吸附能,表明Zr N3-Gr表面更利于CO2加氢反应的发生.在Zr N3-Gr表面, CO2在共吸附后保持了其单独吸附时的特性,削弱了H2分子的吸附. CO2在Zr Nx-Gr表面催化加氢反应起始于H2和CO2的共吸附构型,沿反式HCOOH路径形成甲酸盐(HCOO*)中间体,然后HCOO*基团吸附H原子形成反式甲酸,在Zr N3-Gr和Zr N4-Gr表面该路径的反应能垒分别为1.85和2.48 e V.另一路径为产生CO与H2O的反应,在Zr N3-Gr和Zr N4-Gr表面的反应能垒分别为1.86和1.73 e V,表明Zr N3-Gr更利于CO2加氢生成甲酸反应的发生,而Zr N4-Gr表面更利于CO的产生.